Triangle Coil Flat Heating Element For Vacuum Diffusion Pump
Flat heater is an alternative form of heater. It has the function of heating for the flow of liquid, gaseous medium. When the heating medium through the electric heater heating chamber under pressure, by the principle of fluid thermodynamics evenly take away from the work of electric components in the huge heat generated by the heating medium temperature to the user process requirements.
At the same time it has a large contact area, heating speed, heat transfer efficiency, saving space, power, heating up fast, high reliability, high heat capacity, long service life advantages. Widely used in KFC, McDonald's, Dicos, pizza stoves and other Western kitchen equipment, improve product quality performance while taking into account environmental protection and energy requirements of the times.
Product parameter list:
1. Sheath Material : Incoloy and 304 stainless steel are available. 304 stainless steel is limited to 650 °C(1200 °F)maximum sheath temperature. Incoloy is limited to 760°C(1400 °F)
2. Resistance wire: High grade resistance wire is precisely wound to provide the heat required for your application
3. MgO stick: 99.9% high purity magnesium oxide stick, good verticality, small tolerance
4. MgO: 99.9% pure magnesium powder, high purity, good particle size ratio, resistant to 1200 degrees
5. Lead: Ranging from 90 to 250 °C (194 to 482 °F) construction.
For heating the points, flat tubular heaters with a heating voltage of 230 V AC are used in various lengths with a specific heating power of 330 W/m, 500 W/m or 700 W/m. All heating rods have a cross section of 13 x 5.5 mm and are made of high-quality, corrosion resistant chrome-nickel steel in protection class IP65 (tested waterproof). The service life is approximately 10 years, depending on the conditions on site.
FEATURES & BENEFITS
Flat Profile Design: It's much greater contact to rail surface
Heat Output: Heat Output - Available in 450 w/m and 600 w/m by request.
Single Ended Termination: Quick and easy installation.
Additional Lengths: Also available in 6000mm
Nickel-chromium resistance wire: Ensures even and efficient distribution of heat to the sheath
Magnesium oxide insulation of specific grain and purity: Results in high dielectric strength and contributes to faster heat-up
Corrosion free outer jacket: Stainless steel AISI 304,316,321
Completely sealed connection: No risk of malfunction due to moisture and termination corrosion problems.
| Output Power: |
Up to 350 Watt / meter , 450 Watt / meter , 600 Watt / meter or Customized |
| Supply voltage: |
Usually 1PH 230V or Customized |
| Cold zone 1: |
Typical 140mm |
| Cold zone 2: |
Typical 20mm |
| Physical Size: |
|
| Heating element cross section: |
13*5.5mm |
| Connection head: |
OD 27 mm |
| |
Length 80 mm |
| Heating element length: |
Up to 6000mm |
| Cable length: |
To be specified |
| Outer jacket: |
Stainless steel AISI 304,316,321 |
Product Photos:
Application:
Certificate:
FAQ
(1). Q: Can you give me a discount price?
A: It is depending on the quantity. The larger the quantity is, the more discount you can enjoy.
(2). Q: How can I get a sample?
A: Normally For most our products can be sent free of sample charge if the quantity is small and customers only need to bear the shipping charge, or you can provide your DHL,FEDEX,EMS,UPS courier account number to us. If the quantity is big, we need to charge a sample fee.
(3). Q: Why does your price a bit higher than other Chinese suppliers?
A: We are focusing on manufacuturing high quality performance products in order to establish a long term and friendly cooperation with all customers.
Our price maybe not the lowest, but our cost performance is the highest.
(4). Q: How can you guarantee the quality of mass production keep the same with the sample sent to me before?
A: Our warehouse staff will leave another same sample with your company name marked in our company before sending the samples to you to ensure the same production as the samples.
){kind=link}