Customized Cartridge Heater with Internal J/K Type Thermocouple
Cartridge Heater With Internal Thermocouple is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. The heating wire inside which is wound onto a ceramic core.
The number of coils varies depending on the power. and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures .The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas). Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc they are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.
Apart from our broad standard range we also develop and manufacture cartridge heaters according to your special demands.
Technical Detail:
1. Tube diameter: Φ3mm-Φ30mm
2. Tube Material:SS304;SS316,SS321,NICOLOY800 etc
3. Insulation Material:High-purity Mgo
4. Reisistance wire element:Ni-Cr or FeCr
5. Lead Connection Option: Crimped or Swaged leads
6. Lead and type of connection leads, 10" Fiberglass Standard(Wire options,silicone high temperature frberglass).
| Heat intensity |
Not exceeding 30Wcm2 (advisable) |
| Power |
Depends on the dimension |
| Escape of current (when cold) |
<=0.1mA a 242 v. |
| Insulation (when cold) |
5 Min Ohmios 500 Watts minimum |
| Dielectric strength |
1500v. 1/seg |
| Working temperature |
750ºG max. |
| Tolerance of length |
+/-1.5% |
| Tolerance of diameter |
-0.01 a -0.06 m/m |
| Tolerance of cut of connexion |
+/-15 mlm |
| Power tolerance (w) |
5 % - 10 % |
| Cold areas |
Depends on length and diameter 5-25mm |
Feature:
Commom cartridge can be devideded :
1. High power density(heat area sufuce power 10~25w/cm2)
Working temperature≤450 degrees.
2. Middle,low power density(heat area sufuce power 5~11/cm2)
working temperature≤ 300 degrees
Votage:12~250V (or as requirment)
High Density Construction
High-quality stainless steel construction provides long-lasting protection even in the most rugged industrial environments
Protected with a stainless steel sheath, their watt density can reach 50 W/cm2 and their operating temperature can go up to 800°C.
When ordering Cartridge Heaters, please specify the following information :
1. Type of Cartridge Heater.(please refer to Termination Options)
2. Diameter of Cartridge Heater.
3. Overall length for a straight Cartridge Heaters.
4. Wattage & Voltage
5. Lead type(glass fibre / PTFE) & lead length.
Type of Cartridge Heaters:
Structure:
Picture:
Application:
Certificate:
FAQ
(1). Q: Can you give me a discount price?
A: It is depending on the quantity. The larger the quantity is, the more discount you can enjoy.
(2). Q: How can I get a sample?
A: Normally For most our products can be sent free of sample charge if the quantity is small and customers only need to bear the shipping charge, or you can provide your DHL,FEDEX,EMS,UPS courier account number to us. If the quantity is big, we need to charge a sample fee.
(3). Q: Why does your price a bit higher than other Chinese suppliers?
A: We are focusing on manufacuturing high quality performance products in order to establish a long term and friendly cooperation with all customers.
Our price maybe not the lowest, but our cost performance is the highest.
(4). Q: How can you guarantee the quality of mass production keep the same with the sample sent to me before?
A: Our warehouse staff will leave another same sample with your company name marked in our company before sending the samples to you to ensure the same production as the samples.
){kind=link}